Noise Reduction In Hearing Aids :: essays research papers

Recently in a local auditory sense clinic, a clients concerns were discussed. Im afraid I wont like them. My brother in law bought deuce hear aids, and he keeps them in a drawer in the kitchen. time the add up of people dissatisfied with their hearing aids hovers around 50%, the hearing aid industry is hard pressed to decrease the number of returns, and increase the average daily use of each aid. In revision to win this, hearing aid manufacturers must answer the most very much heard complaint It doesnt work well in noise. Unfortunately, a hearing aid will never be able to accomplish the sifting and sorting that is carried out in the human brain. While a person with normal hearing sits in a restaurant, he idler distinguish a conversational expression signal that is as short as three decibels greater than the close noise. On the other hand, a person with a 30-decibel sensorineural loss might need the speech signal to be 15 or more decibels greater than the ambient noise. Th e hearing aids task is to acoustically or electronically compensate for both the neurological shortcomings of the hearing impaired person and the wide-cut band increase inherent in any basic amplifier. acoustical compensation can be carried out in a hearing aid microphone. Most hearing aids today utilize omnidirectional microphones, which pick up sound equally from all directions. This may be beneficial and practical in some cases, as in the whole in the canal (CIC) aid. The CIC aid uses the natural funneling of the auricle in score to focus sound directly into the instrument. Behind-the-ear (BTE) and full concha in-the-ear (ITE) aids lose this anatomical feature, and may benefit from a directional microphone. The purpose of using a directional microphone is to focus its sensitivity toward the front of the listener, thereby attenuating or reducing unwanted noise or competition emanating from behind the listener. (Stach 1998) mike directionality can be accomplished by using a si ngle microphone with two sound introductions. In this mechanical method, the time lag created by a sound entering each inlet is precisely calibrated to cancel out sounds from the sides and back of the microphone as they strike the diaphragm. The Phonak MicroZoom&61668 uses an electronic approach. Each MicroZoom&61668 contains two omnidirectional microphones. According to the flyer, angiotensin-converting enzyme picks up sound in front of you while a imprimatur picks up sound from the sides and rear.